 |
RetainWall 2.10
RetainWall is a software mainly designed for the purpose of designing a concrete or masonry retaining wall. The wall may retain soil or other granular material. It analyses the stability of the wall based on the loads and the resulting base pressure, sliding and eccentricities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads.
retainwall, retwall, retain, retaining, wall, soil, earth, presure, stability, shear, |
 |
LeanWall 1.10.40
LeanWall is a software mainly designed for the purpose of designing a concrete or masonry leaning wall. The wall may lean on rock or soil and may retain soil or other granular material. It analyses the stability of the wall based on the loads and the resulting base pressure, sliding, anchor stresses and excentricities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads.
leanwall, lean, leaning, wall, soil, earth, rock, pressure, stability, engineering, |
 |
NovoSPT 1.9
NovoSPT is designed for analyzing Standard Penetration Test (SPT/ DCPT) blow counts and correlating N values to soil engineering properties. The following features are incorporated: correction factors including depth, rod length, etc., Consistency classification for all soil types, Liquefactions potential and many other soil correlations such as friction angle, Es, Vs, Gmax, Dr, fs, Qall, Settlement, etc., Save, Load, Graphs and reports
spt, dcpt, geotechnical, soil, spt correlation, spt correction, geotechnical software, soil mechanics, standard penetration test, soil properties, |
 |
LateralK 2.3
LateralK is a simple software for calculating lateral earth pressure coefficients behind retaining walls in static and earthquake condition based on Rankine/ Coulumb formulae and also Mononobe/ Okabe methods. User manual (Help) is available for software. LateralK has very well-designed report manager with print and page setup capabillities.
borehole log, earth pressure, lateral earth pressure, retaining wall design, active pressure, passive pressure, at rest pressure, soil, geotechnic, soil mechanics, |
 |
NovoCPT 1.2
NovoCPT is designed for processing CPT files and calculating soil parameters such as friction angle, relative density, unit weight, fines content, shear wave velocity, Gmax, clay sensitivity, OCR, undrained shear strength, soil behavior type (SBT), Ic, at-rest earth pressure coefficient Ko and ...
- Liquefaction analysis
- Shallow footing settlement analysis
- Pile bearing capacity analysis (LCPC)
It has powerful reports, export to Excel,...
geotechnical, soil, cpt correlation, geotechnical software, soil mechanics, cone penetration test, |
|
| Login |
Not a member yet? Click here to register.
Forgotten your password? Request a new one here.
|
|
